**Note** In the filtering sequences you should use the values set for xmpp parameters as follows: * "xmpp_domain" instead of "xmpp-sip.siphub.ro" * "gateway_domain" instead of "sip-xmpp.siphub.ro" * "xmpp_host" instead of "xmpp.siphub.ro" # simple quick-start config script # # ----------- global configuration parameters ------------------------ /* Uncomment these lines to enter debugging mode */ debug=7 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes sip_warning=0 check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=udp:192.168.2.132:5060 children=4 #fifo="/tmp/kamailio_fifo" # # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify_server = 1 #tls_verify_client = 1 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/kamailio/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/kamailio/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/kamailio/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- mpath="../sip-server/modules/" loadmodule "db_mysql/db_mysql.so" loadmodule "sl/sl.so" loadmodule "maxfwd/maxfwd.so" loadmodule "textops/textops.so" loadmodule "tm/tm.so" loadmodule "rr/rr.so" loadmodule "presence/presence.so" loadmodule "avpops/avpops.so" loadmodule "mi_fifo/mi_fifo.so" loadmodule "usrloc/usrloc.so" loadmodule "registrar/registrar.so" loadmodule "pua/pua.so" loadmodule "xmpp/xmpp.so" loadmodule "pua_xmpp/pua_xmpp.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/kamailio/modules/auth.so" #loadmodule "/usr/local/lib/kamailio/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- modparam("xmpp", "domain_separator", "*") modparam("xmpp", "gateway_domain", "sip-xmpp.siphub.ro") modparam("xmpp", "xmpp_domain", "xmpp-sip.siphub.ro") modparam("xmpp", "xmpp_host", "xmpp.siphub.ro") #modparam("xmpp", "backend", "server") modparam("xmpp", "backend", "component") modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") # -- usrloc params -- # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- presence params -- modparam("presence", "db_url", "mysql://openser:openserrw@192.168.2.132/openser") modparam("usrloc", "db_url", "mysql://openser:openserrw@192.168.2.132/openser") modparam("pua", "db_url", "mysql://openser:openserrw@192.168.2.132/openser") modparam("pua", "db_table", "pua") modparam("presence", "force_active", 1) modparam("presence", "max_expires", 3600) modparam("presence", "server_address", "sip:192.168.2.132:5060") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if(method == "INVITE") setflag(5); if( uri=~"sip:.+@sip-xmpp.siphub.ro" || uri=~"sip:.+@sip-xmpp.siphub.ro") { if( is_method("PUBLISH|SUBSCRIBE|NOTIFY")) route(2); } if( uri=~"sip:.+@sip-xmpp.siphub.ro") { # absorb retransmissions ### if (!t_newtran()) { sl_reply_error(); return; } if (method == "MESSAGE") { log("*** xmpp-handled MESSAGE message.\n"); if (xmpp_send_message()) { t_reply("200", "Accepted"); } else { t_reply("404", "Not found"); } return; }else { t_reply("403","not supported"); exit; } } if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay("tls:domain2.net"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if( is_method("PUBLISH|SUBSCRIBE|NOTIFY")) route(2); if (method=="REGISTER") { # Uncomment this if you want to use digest authentication #if (!www_authorize("openser.org", "subscriber")) { # www_challenge("openser.org", "0"); # exit; #}; save("location"); exit; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } route[2] { if ( !t_newtran() ) { sl_reply_error(); exit; }; if( is_method("NOTIFY") && uri=~"sip:.+@sip-xmpp.siphub.ro") { pua_xmpp_notify(); t_reply("200", "OK"); exit; } if(is_method("PUBLISH")) { handle_publish(""); t_release(); } else if( is_method("SUBSCRIBE")) { handle_subscribe(); if( uri=~"sip:.+@sip-xmpp.siphub.ro" && $hdr(Event)== "presence") { pua_xmpp_req_winfo("$ruri", "$hdr(Expires)"); } t_release(); } exit; }