– Kamailio SIP Server –

Note In the filtering sequences you should use the values set for xmpp parameters as follows:

  • “xmpp_domain” instead of “xmpp-sip.siphub.ro”
  • “gateway_domain” instead of “sip-xmpp.siphub.ro”
  • “xmpp_host” instead of “xmpp.siphub.ro”
# simple quick-start config script
#
 
# ----------- global configuration parameters ------------------------
 
/* Uncomment these lines to enter debugging mode */ 
debug=7            # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes
 
sip_warning=0
 
check_via=no	# (cmd. line: -v)
dns=no          # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
listen=udp:192.168.2.132:5060
children=4
#fifo="/tmp/kamailio_fifo"
 
#
# uncomment the following lines for TLS support
#disable_tls = 0
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/kamailio/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/kamailio/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/kamailio/tls/user/user-calist.pem"
 
# ------------------ module loading ----------------------------------
mpath="../sip-server/modules/"
 
loadmodule "db_mysql/db_mysql.so"
loadmodule "sl/sl.so"
loadmodule "maxfwd/maxfwd.so"
loadmodule "textops/textops.so"
loadmodule "tm/tm.so"
loadmodule "rr/rr.so"
loadmodule "presence/presence.so"
loadmodule "avpops/avpops.so"
loadmodule "mi_fifo/mi_fifo.so"
loadmodule "usrloc/usrloc.so"
loadmodule "registrar/registrar.so"
loadmodule "pua/pua.so"
loadmodule "xmpp/xmpp.so"
loadmodule "pua_xmpp/pua_xmpp.so"
 
 
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/kamailio/modules/auth.so"
#loadmodule "/usr/local/lib/kamailio/modules/auth_db.so"
 
# ----------------- setting module-specific parameters ---------------
modparam("xmpp", "domain_separator", "*")
modparam("xmpp", "gateway_domain", "sip-xmpp.siphub.ro")
modparam("xmpp", "xmpp_domain", "xmpp-sip.siphub.ro")
modparam("xmpp", "xmpp_host", "xmpp.siphub.ro")
#modparam("xmpp", "backend", "server")
modparam("xmpp", "backend", "component")
 
 
modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")
 
# -- usrloc params --
# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
 
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
 
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
 
# -- presence params --
modparam("presence", "db_url", "mysql://openser:openserrw@192.168.2.132/openser")
modparam("usrloc", "db_url", "mysql://openser:openserrw@192.168.2.132/openser")
modparam("pua", "db_url", "mysql://openser:openserrw@192.168.2.132/openser")
modparam("pua", "db_table", "pua")
 
modparam("presence", "force_active", 1)
modparam("presence", "max_expires", 3600)
modparam("presence", "server_address", "sip:192.168.2.132:5060")
 
 
# -------------------------  request routing logic -------------------
 
# main routing logic
 
 
route{
 
	# initial sanity checks -- messages with
	# max_forwards==0, or excessively long requests
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		exit;
	};
 
	if (msg:len >=  2048 ) {
		sl_send_reply("513", "Message too big");
		exit;
	};
 
	# we record-route all messages -- to make sure that
	# subsequent messages will go through our proxy; that's
	# particularly good if upstream and downstream entities
	# use different transport protocol
	if (!method=="REGISTER")
		record_route();
 
	# subsequent messages withing a dialog should take the
	# path determined by record-routing
	if (loose_route()) {
		# mark routing logic in request
		append_hf("P-hint: rr-enforced\r\n"); 
		route(1);
	};
	if(method == "INVITE")
		setflag(5);
 
	if( uri=~"sip:.+@sip-xmpp.siphub.ro" ||
		 uri=~"sip:.+@sip-xmpp.siphub.ro")
	{
		if( is_method("PUBLISH|SUBSCRIBE|NOTIFY"))
			route(2);
	}
 
	if( uri=~"sip:.+@sip-xmpp.siphub.ro")
	{
		# absorb retransmissions ###
		if (!t_newtran()) {
			sl_reply_error();
			return;
		}
        if (method == "MESSAGE") {
			log("*** xmpp-handled MESSAGE message.\n");
			if (xmpp_send_message()) {
				t_reply("200", "Accepted");
			} else {
				t_reply("404", "Not found");
			}
			return;
		}else {
			t_reply("403","not supported");
			exit;
		}
 
	}
 
	if (!uri==myself) {
		# mark routing logic in request
		append_hf("P-hint: outbound\r\n"); 
		# if you have some interdomain connections via TLS
		#if(uri=~"@tls_domain1.net") {
		#	t_relay("tls:domain1.net");
		#	exit;
		#} else if(uri=~"@tls_domain2.net") {
		#	t_relay("tls:domain2.net");
		#	exit;
		#}
		route(1);
	};
 
	# if the request is for other domain use UsrLoc
	# (in case, it does not work, use the following command
	# with proper names and addresses in it)
	if (uri==myself) {
 
		if( is_method("PUBLISH|SUBSCRIBE|NOTIFY"))
			route(2);
 
		if (method=="REGISTER") {
 
			# Uncomment this if you want to use digest authentication
			#if (!www_authorize("openser.org", "subscriber")) {
			#	www_challenge("openser.org", "0");
			#	exit;
			#};
 
			save("location");
			exit;
		};
 
		# native SIP destinations are handled using our USRLOC DB
		if (!lookup("location")) {
			sl_send_reply("404", "Not Found");
			exit;
		};
		append_hf("P-hint: usrloc applied\r\n"); 
	};
 
	route(1);
}
 
 
route[1] {
	# send it out now; use stateful forwarding as it works reliably
	# even for UDP2TCP
	if (!t_relay()) {
		sl_reply_error();
	};
	exit;
}
 
route[2]
{
	if ( !t_newtran() )
	{
        sl_reply_error();
        exit;
     };
 
	if( is_method("NOTIFY") && uri=~"sip:.+@sip-xmpp.siphub.ro")
	{
		pua_xmpp_notify();
		t_reply("200", "OK");
		exit;
	}
 
	if(is_method("PUBLISH"))
	{
		handle_publish("");
		t_release();
	} 
	else 
	if( is_method("SUBSCRIBE"))
	{
		handle_subscribe();
		if( uri=~"sip:.+@sip-xmpp.siphub.ro" && $hdr(Event)== "presence")
		{
			pua_xmpp_req_winfo("$ruri", "$hdr(Expires)");
		}
		t_release();
	}
 
	exit;
}