SipCapture Module

Alexandr Dubovikov

Edited by

Alexandr Dubovikov


Table of Contents

1. Admin Guide
1. Overview
2. Dependencies
2.1. Kamailio Modules
2.2. External Libraries or Applications
3. Parameters
3.1. db_url (str)
3.2. table_name (str)
3.3. partitioning_mode (integer)
3.4. db_insert_mode (integer)
3.5. capture_on (integer)
3.6. hep_capture_on (integer)
3.7. raw_ipip_capture_on (integer)
3.8. raw_moni_capture_on (integer)
3.9. raw_socket_listen (string)
3.10. raw_interface (string)
3.11. raw_sock_children (integer)
3.12. promiscuous_on (integer)
3.13. raw_moni_bpf_on (integer)
3.14. capture_node (str)
4. MI Commands
4.1. sip_capture
5. Database setup
6. Limitation

List of Examples

1.1. Set db_url parameter
1.2. Set sip_capture parameter
1.3. partitioning_mode
1.4. db_insert_mode example
1.5. Set capture_on parameter
1.6. Set hep_capture_on parameter
1.7. Set raw_ipip_capture_on parameter
1.8. Set raw_moni_capture_on parameter
1.9. Set raw_socket_listen parameter
1.10. Set raw_socket_listen parameter
1.11. Set raw_socket_listen parameter
1.12. Set hep_capture_on parameter
1.13. Set raw_moni_bpf_on parameter
1.14. Set capture_node parameter

Chapter 1. Admin Guide

1. Overview

Offer a possibility to store incoming/outgoing SIP messages in database.

Kamailio can capture SIP messages in three mode

  • IPIP encapsulation. (ETHHDR+IPHDR+IPHDR+UDPHDR).

  • Monitoring/mirroring port.

  • Homer encapsulation protocl mode (HEP v1).

The capturing can be turned on/off using fifo commad.

kamctl fifo sip_capture on

kamctl fifo sip_capture off

2. Dependencies

2.1. Kamailio Modules

The following modules must be loaded before this module:

  • database module - mysql, postrgress, dbtext, unixodbc...

2.2. External Libraries or Applications

The following libraries or applications must be installed before running Kamailio with this module loaded:

  • None.

3. Parameters

3.1. db_url (str)

Database URL.

Default value is "".

Example 1.1. Set db_url parameter

...
modparam("sipcapture", "db_url", "mysql://user:passwd@host/dbname")
...

3.2. table_name (str)

Name of the table's name where to store the SIP messages. If partitioning_mode set to 1, the table_name is a prefix to separate table. i.e. sip_capture_01_02.

Default value is "sip_capture".

Example 1.2. Set sip_capture parameter

...
modparam("sipcapture", "table_name", "homer_capture")
...

3.3. partitioning_mode (integer)

If set to 0, records will store to separate table, depends on the day of the week and the hour of the day. Otherwise records will store into partitioning table.

Default value is 1.

Example 1.3. partitioning_mode

modparam("sipcapture", "partitioning_mode", 0)

3.4. db_insert_mode (integer)

If set to 1, use INSERT DELAYED to store sip message into capture table when the DB driver has support for it. If no INSERT DELAYED support is offered by DB driver, then standard INSERT is used.

Default value is 0 (no INSERT DELAYED).

Example 1.4. db_insert_mode example

modparam("sipcapture", "db_insert_mode", 1)

3.5. capture_on (integer)

Parameter to enable/disable capture globaly (on(1)/off(0))

Default value is "0".

Example 1.5. Set capture_on parameter

...
modparam("sipcapture", "capture_on", 1)
...

3.6. hep_capture_on (integer)

Parameter to enable/disable capture of HEP (on(1)/off(0))

Default value is "0".

Example 1.6. Set hep_capture_on parameter

...
modparam("sipcapture", "hep_capture_on", 1)
...

3.7. raw_ipip_capture_on (integer)

Parameter to enable/disable IPIP capturing (on(1)/off(0))

Default value is "0".

Example 1.7. Set raw_ipip_capture_on parameter

...
modparam("sipcapture", "raw_ipip_capture_on", 1)
...

3.8. raw_moni_capture_on (integer)

Parameter to enable/disable monitoring/mirroring port capturing (on(1)/off(0)) Only one mode on raw socket can be enabled! Monitoring port capturing currently supported only on Linux.

Default value is "0".

Example 1.8. Set raw_moni_capture_on parameter

...
modparam("sipcapture", "raw_moni_capture_on", 1)
...

3.9. raw_socket_listen (string)

Parameter indicate an listen IP address of RAW socket for IPIP capturing. You can also define a port/portrange for IPIP/Mirroring mode, to capture SIP messages in specific ports:

"10.0.0.1:5060" - the source/destination port of the SIP message must be equal 5060

"10.0.0.1:5060-5090" - the source/destination port of the SIP message must be equal or be between 5060 and 5090.

The port/portrange must be defined if you are planning to use mirroring capture! In this case, the part with IP address will be ignored, but to make parser happy, use i.e. 10.0.0.0

Default value is "".

Example 1.9. Set raw_socket_listen parameter

...
modparam("sipcapture", "raw_socket_listen", "10.0.0.1:5060-5090")
...
modparam("sipcapture", "raw_socket_listen", "10.0.0.1:5060")
...

3.10. raw_interface (string)

Name of the interface to bind on the raw socket.

Default value is "".

Example 1.10. Set raw_socket_listen parameter

...
modparam("sipcapture", "raw_interface", "eth0")
...

3.11. raw_sock_children (integer)

Parameter define how much children must be created to listen the raw socket.

Default value is "1".

Example 1.11. Set raw_socket_listen parameter

...
modparam("sipcapture", "raw_sock_children", 6)
...

3.12. promiscuous_on (integer)

Parameter to enable/disable promiscuous mode on the raw socket. Linux only.

Default value is "0".

Example 1.12. Set hep_capture_on parameter

...
modparam("sipcapture", "promiscuous_on", 1)
...

3.13. raw_moni_bpf_on (integer)

Activate Linux Socket Filter (LSF based on BPF) on the mirroring interface. The structure is defined in linux/filter.h. The default LSF accept a port/portrange from the raw_socket_listen param. Currently LSF supported only on Linux.

Default value is "0".

Example 1.13. Set raw_moni_bpf_on parameter

...
modparam("sipcapture", "raw_moni_bpf_on", 1)
...

3.14. capture_node (str)

Name of the capture node.

Default value is "homer01".

Example 1.14. Set capture_node parameter

...
modparam("sipcapture", "capture_node", "homer03")
...

4. MI Commands

4.1.  sip_capture

Name: sip_capture

Parameters:

  • capture_mode : turns on/off SIP message capturing. Possible values are:

    • on

    • off

    The parameter is optional - if missing, the command will return the status of the SIP message capturing (as string on or off ) without changing anything.

MI FIFO Command Format:

		:sip_capture:_reply_fifo_file_
		capture_mode
		_empty_line_

5. Database setup

Before running Kamailio with sipcapture, you have to setup the database tables where the module will store the data. For that, if the table were not created by the installation script or you choose to install everything by yourself you can use the sipcapture-create.sql or the sipcapture-st-create.sql SQL script in the database directories in the kamailio/scripts folder as template. You can also find the complete database documentation on the project webpage, http://www.kamailio.org/docs/db-tables/kamailio-db-devel.html.

6. Limitation

1. Only one capturing mode on RAW socket is supported: IPIP or monitoring/mirroring port. Don't activate both at the same time. 2. By default MySQL doesn't support INSERT DELAYED for partitioning table. You can patch MySQL (http://bugs.mysql.com/bug.php?id=50393) or use separate tables (pseudo partitioning) 3. Mirroring port capturing works only on Linux.