Textopsx Module

Andrei Pelinescu-Onciul

FhG FOKUS

Daniel-Constantin Mierla

asipto.com

Table of Contents

1. Admin Guide
1. Overview
2. Functions
2.1. msg_apply_changes()
2.2. msg_set_buffer(data)
2.3. change_reply_status(code, reason)
2.4. change_reply_status_code(vcode)
2.5. remove_body()
2.6. keep_hf([regexp])
2.7. fnmatch(value, expr [, flags])
2.8. append_hf_value(hf, hvalue)
2.9. insert_hf_value(hf, hvalue)
2.10. remove_hf_value(hf_par)
2.11. remove_hf_value2(hf_par)
2.12. assign_hf_value(hf, hvalue)
2.13. assign_hf_value2(hf, hvalue)
2.14. include_hf_value(hf, hvalue)
2.15. exclude_hf_value(hf, hvalue)
2.16. hf_value_exists(hf, hvalue)
2.17. hf_iterator_start(iname)
2.18. hf_iterator_end(iname)
2.19. hf_iterator_next(iname)
2.20. hf_iterator_prev(iname)
2.21. hf_iterator_rm(iname)
2.22. hf_iterator_append(iname, htext)
2.23. hf_iterator_insert(iname, htext)
2.24. bl_iterator_start(iname)
2.25. bl_iterator_end(iname)
2.26. bl_iterator_next(iname)
2.27. bl_iterator_rm(iname)
2.28. bl_iterator_append(iname, text)
2.29. bl_iterator_insert(iname, text)
3. Selects
3.1. @hf_value
3.2. @hf_value2
3.3. @hf_value_exists

List of Examples

1.1. msg_apply_changes() usage
1.2. msg_set_buffer() usage
1.3. change_reply_status usage
1.4. change_reply_status_code usage
1.5. remove_body() usage
1.6. keep_hf() usage
1.7. fnmatch() usage
1.8. append_hf_value usage
1.9. insert_hf_value usage
1.10. remove_hf_value usage
1.11. remove_hf_value2 usage
1.12. assign_hf_value usage
1.13. assign_hf_value2 usage
1.14. include_hf_value usage
1.15. exclude_hf_value usage
1.16. hf_value_exists usage
1.17. hf_iterator_start usage
1.18. hf_iterator_end usage
1.19. hf_iterator_next usage
1.20. hf_iterator_prev usage
1.21. hf_iterator_rm usage
1.22. hf_iterator_append usage
1.23. hf_iterator_insert usage
1.24. bl_iterator_start usage
1.25. bl_iterator_end usage
1.26. bl_iterator_next usage
1.27. bl_iterator_rm usage
1.28. bl_iterator_append usage
1.29. bl_iterator_insert usage
1.30. @hf_value select usage

Chapter 1. Admin Guide

1. Overview

This module implements functions for SIP message text operations in routing block configurations. It adds new features similar to the textops module (textops eXtentions).

Note: If you add or remove message parts (header, body etc..) it may be required to execute msg_apply_changes() from this module if there are other operations done on the SIP message later on.

2. Functions

2.1.  msg_apply_changes()

Use this function to apply changes performed on SIP message content. Be careful when using this function; due to special handling of changes to the SIP message buffer so far, using this function might change the behaviour of your config. Do test your config properly!

The function returns true (1) on success. If it is failure before the new content is built, the function returns false (-1), the old content is still in place. If parsing of the new content is failing, the function stops executions of the config file (the internal structure is no longer valid for config processing, like it happens when a broken message is received from network).

This function can be used from REQUEST_ROUTE or core REPLY_ROUTE.

Note: It must be used before the transaction is created in request_route and not inside the onreply_route[name] executed by tm module. Also, do not use after resuming a suspended request or reply, at that moment the transaction is already created.

Example 1.1. msg_apply_changes() usage

...
append_hf("My-Header: yes\r\n");
if(msg_apply_changes())
{
    # msg buffer has a new content
    if(is_present_hf("My-Header"))
    {
        # will get here always
    }
}
...

2.2.  msg_set_buffer(data)

Set the content of the SIP message buffer, replacing the exiting data. The parameter can contain variables, its value must be a valid SIP request or reply, a matter of what the old message is.

This function can be used from REQUEST_ROUTE or core REPLY_ROUTE.

Note: It must be used before the transaction is created in request_route and not inside the onreply_route[name] executed by tm module. Also, do not use after resuming a suspended request or reply, at that moment the transaction is already created.

Example 1.2. msg_set_buffer() usage

...
msg_set_buffer("INVITE sip:...");
...

2.3.  change_reply_status(code, reason)

Intercept a SIP reply (in an onreply_route) and change its status code and reason phrase prior to forwarding it.

Meaning of the parameters is as follows:

  • code - Status code.

  • reason - Reason phrase.

This function can be used from ONREPLY_ROUTE.

Example 1.3. change_reply_status usage

...
reply_route {
    if (status == "603") {
        change_reply_status(404, "Not Found");
        exit;
    }
}
...

2.4.  change_reply_status_code(vcode)

Change the status code for a SIP reply .

Meaning of the parameters is as follows:

  • vcode - the new status code.

This function can be used from ONREPLY_ROUTE.

Example 1.4. change_reply_status_code usage

...
reply_route {
    if (status == "604") {
        change_reply_status_code("404");
        exit;
    }
}
...

2.5.  remove_body()

Use this function to remove the body of SIP requests or replies.

This function can be used from ANY_ROUTE.

Example 1.5. remove_body() usage

...
remove_body();
...

2.6.  keep_hf([regexp])

Remove headers that don't match the regular expression regexp. Several header are ignored always (thus not removed): Via, From, To, Call-ID, CSeq, Content-Length, Content-Type, Max-Forwards, Contact, Route, Record-Route -- these can be removed one by one with remove_hf(). If regexp is missing, then only the headers listed above are kept, the rest are removed.

This function can be used from ANY_ROUTE.

Example 1.6. keep_hf() usage

...
keep_hf("User-Agent");
...

2.7.  fnmatch(value, expr [, flags])

Match the value against the expr using shell-style pattern for file name matching (see man page for C function fnmatch()). It is known to be faster and use less-memory than regular expressions.

Parameter 'flags' is optional and can be 'i' to do case insensitive matching.

This function can be used from ANY_ROUTE.

Example 1.7. fnmatch() usage

...
if(fnmatch("$rU", "123*"))
{
    ...
}
...

2.8.  append_hf_value(hf, hvalue)

Append new header value after an existing header, if no index acquired append at the end of list. Note that a header may consist of comma delimited list of values.

Meaning of the parameters is as follows:

  • hf - Header field to be appended. Format: HFNAME [ [IDX] ]. If index is not specified new header is inserted at the end of message. The index 1 correxponds to the first header.

  • hvalue - Value to be added, config var formatting supported.

Example 1.8. append_hf_value usage

...
append_hf_value("foo", "gogo;stamp=$Ts")   # add new header
append_hf_value("foo[1]", "gogo")  # add new value behind first value
append_hf_value("foo[-1]", "$var(Bar)") # try add value to the last header, if not exists add new header
...

2.9.  insert_hf_value(hf, hvalue)

Insert new header value before an existing header, if no index acquired insert before first hf header. Note that a header may consist of comma delimited list of values. To insert a value behind the last value use append_hf_value.

Meaning of the parameters is as follows:

  • hf - Header field to be appended. Format: HFNAME [ [IDX] ]. If index is not specified new header is inserted at the top of message. The index 1 correxponds to the first header.

  • hvalue - Value to be added, config var formatting supported.

Example 1.9. insert_hf_value usage

...
insert_hf_value("foo[2]", "gogo")
insert_hf_value("foo", "$avp(foo)")   # add new header at the top of list
insert_hf_value("foo[1]", "gogo") # try add to the first header
...

2.10.  remove_hf_value(hf_par)

Remove the header value from existing header, Note that a header may consist of comma delimited list of values.

Meaning of the parameters is as follows:

  • hf_par - Header field/param to be removed. Format: HFNAME [ [IDX] ] [. PARAM ] If asterisk is specified as index then all values are affected. The index 1 correxponds to the first header.

Example 1.10. remove_hf_value usage

...
remove_hf_value("foo")  # remove foo[1]
remove_hf_value("foo[*]")  # remove all foo's headers
remove_hf_value("foo[-1]") # last foo
remove_hf_value("foo.bar")  # delete parameter
remove_hf_value("foo[*].bar") # for each foo delete bar parameters
...

2.11.  remove_hf_value2(hf_par)

Remove specified header or parameter. It is expected header in Authorization format (comma delimiters are not treated as multi-value delimiters).

Meaning of the parameters is as follows:

  • hf_par - Header/param to be removed. Format: HFNAME [ [IDX] ] [. PARAM ] If asterisk is specified as index then all values are affected. The index 1 correxponds to the first header.

Example 1.11. remove_hf_value2 usage

...
remove_hf_value2("foo")  # remove foo[1]
remove_hf_value2("foo[*]")  # remove all foo's headers, the same as remove_hf_header("foo[*]");
remove_hf_value2("foo[-1]") # last foo
remove_hf_value2("foo.bar")  # delete parameter
remove_hf_value2("foo[*].bar") # for each foo delete bar parameters
...

2.12.  assign_hf_value(hf, hvalue)

Assign value to specified header value / param.

Meaning of the parameters is as follows:

  • hf_para - Header field value / param to be appended. Format: HFNAME [ [IDX] ] [. PARAM] If asterisk is specified as index then all values are affected. The index 1 correxponds to the first header.

  • hvalue - Value to be assigned, config var formatting supported. If value is empty then no equal sign appears in param.

Example 1.12. assign_hf_value usage

...
assign_hf_value("foo", "gogo")  # foo[1]
assign_hf_value("foo[-1]", "gogo")  # foo[last_foo]

assign_hf_value("foo.bar", "")
assign_hf_value("foo[3].bar", "")
assign_hf_value("foo[*]", "")  # remove all foo's, empty value remains
assign_hf_value("foo[*].bar", "")  # set empty value (ex. lr)
...

2.13.  assign_hf_value2(hf, hvalue)

Assign value to specified header. It is expected header in Authorization format (comma delimiters are not treated as multi-value delimiters).

Meaning of the parameters is as follows:

  • hf_para - Header field value / param to be appended. Format: HFNAME [ [IDX] ] [. PARAM] If asterisk is specified as index then all values are affected. The index 1 correxponds to the first header.

  • hvalue - Value to be assigned, config var formatting supported. If value is empty then no equal sign appears in param.

Example 1.13. assign_hf_value2 usage

...
assign_hf_value2("Authorization.integrity-protected", "\"yes\"")
assign_hf_value2("foo[-1]", "gogo")  # foo[last_foo]
assign_hf_value2("foo[*].bar", "")  # set empty value (ex. lr)
...

2.14.  include_hf_value(hf, hvalue)

Add value in set if not exists, eg. "Supported: path,100rel".

Meaning of the parameters is as follows:

  • hf - Header field name to be affected.

  • hvalue - config var formatting supported.

Example 1.14. include_hf_value usage

...
include_hf_value("Supported", "path");
...

2.15.  exclude_hf_value(hf, hvalue)

Remove value from set if exists, eg. "Supported: path,100rel".

Meaning of the parameters is as follows:

  • hf - Header field name to be affected.

  • hvalue - config formatting supported.

Example 1.15. exclude_hf_value usage

...
exclude_hf_value("Supported", "100rel");
...

2.16.  hf_value_exists(hf, hvalue)

Check if value exists in set. Alternate select @hf_value_exists.HF.VALUE may be used. It returns one or zero.

Meaning of the parameters is as follows:

  • hf - Header field name to be affected. Underscores are treated as dashes.

  • hvalue - config var formatting supported.

Example 1.16. hf_value_exists usage

...
if (hf_value_exists("Supported", "100rel")) {

}

if (@hf_value_exists.supported.path == "1") {

}
...

2.17.  hf_iterator_start(iname)

Start an iterator for headers in the current SIP message. The parameter iname is used to identify the iterator. There can be up to 4 iterators at the same time, with different name.

The parameter can be a dynamic string with variables.

This function can be used from ANY_ROUTE.

Example 1.17. hf_iterator_start usage

...
hf_iterator_start("i1");
...

2.18.  hf_iterator_end(iname)

Close the iterator identified by iname parameter. The iname value must be the same used for hf_iterator_start().

The parameter can be dynamic string with variables.

This function can be used from ANY_ROUTE.

Example 1.18. hf_iterator_end usage

...
hf_iterator_end("i1");
...

2.19.  hf_iterator_next(iname)

Move the iterator to the next header. It must be called also after hf_iterator_start() to get the first header.

The return code is false when there is no other header in the list.

The item name and value are accessible via variables: $hfitname(iname) and $hfitbody(iname).

The parameter can be dynamic string with variables.

This function can be used from ANY_ROUTE.

Example 1.19. hf_iterator_next usage

...
    hf_iterator_start("i1");
    while(hf_iterator_next("i1")) {
        xlog("hdr[$hfitname(i1)] is: $hfitbody(i1)\n");
    }
    hf_iterator_end("i1");
...

2.20.  hf_iterator_prev(iname)

Move the iterator to the previous header. It must be called also after hf_iterator_start() and hf_iterator_next().

The parameter can be dynamic string with variables.

This function can be used from ANY_ROUTE.

Example 1.20. hf_iterator_prev usage

...
    hf_iterator_start("i1");
    hf_iterator_next("i1");
...
    hf_iterator_next("i1");
...
    hf_iterator_prev("i1");
...
    hf_iterator_end("i1");
...

2.21.  hf_iterator_rm(iname)

Remove the header at the current iterator position.

The parameter can be dynamic string with variables.

This function can be used from ANY_ROUTE.

Example 1.21. hf_iterator_rm usage

...
    hf_iterator_start("i1");
    while(hf_iterator_next("i1")) {
        if($hfitname(i1)=="My-Header") {
            hf_iterator_rm("i1");
        }
    }
    hf_iterator_end("i1");
...

2.22.  hf_iterator_append(iname, htext)

Add headers after the one at the current iterator possition.

The parameters can be dynamic strings with variables.

This function can be used from ANY_ROUTE.

Example 1.22. hf_iterator_append usage

...
    hf_iterator_start("i1");
    while(hf_iterator_next("i1")) {
        if($hfitname(i1)=="My-Header") {
            hf_iterator_append("i1", "My-New-Header: abc\r\n");
            break;
        }
    }
    hf_iterator_end("i1");
...

2.23.  hf_iterator_insert(iname, htext)

Add headers before the one at the current iterator possition.

The parameters can be dynamic strings with variables.

This function can be used from ANY_ROUTE.

Example 1.23. hf_iterator_insert usage

...
    hf_iterator_start("i1");
    while(hf_iterator_next("i1")) {
        if($hfitname(i1)=="My-Header") {
            hf_iterator_insert("i1", "My-New-Header: abc\r\n");
            break;
        }
    }
    hf_iterator_end("i1");
...

2.24.  bl_iterator_start(iname)

Start an iterator for lines in the body of the current SIP message. The parameter iname is used to identify the iterator. There can be up to 4 iterators at the same time, with different name.

The parameter can be a dynamic string with variables.

This function can be used from ANY_ROUTE.

Example 1.24. bl_iterator_start usage

...
bl_iterator_start("b1");
...

2.25.  bl_iterator_end(iname)

Close the iterator identified by iname parameter. The iname value must be the same used for bl_iterator_start().

The parameter can be dynamic string with variables.

This function can be used from ANY_ROUTE.

Example 1.25. bl_iterator_end usage

...
bl_iterator_end("b1");
...

2.26.  bl_iterator_next(iname)

Move the iterator to the next line in the body. It must be called also after bl_iterator_start() to get the first header.

The return code is false when there is no other header in the list.

The body line accessible via variable $blitval(iname) - it contains also the EOL chars.

The parameter can be dynamic string with variables.

This function can be used from ANY_ROUTE.

Example 1.26. bl_iterator_next usage

...
    bl_iterator_start("b1");
    while(bl_iterator_next("b1")) {
        xlog("body line: $blitval(b1)");
    }
    bl_iterator_end("b1");
...

2.27.  bl_iterator_rm(iname)

Remove the body line at the current iterator position.

The parameter can be dynamic string with variables.

This function can be used from ANY_ROUTE.

Example 1.27. bl_iterator_rm usage

...
    bl_iterator_start("b1");
    while(bl_iterator_next("b1")) {
        if($blitval(b1)=~"abc") {
            bl_iterator_rm("b1");
        }
    }
    bl_iterator_end("b1");
...

2.28.  bl_iterator_append(iname, text)

Add text after the line at the current iterator possition.

The parameters can be dynamic strings with variables.

This function can be used from ANY_ROUTE.

Example 1.28. bl_iterator_append usage

...
    bl_iterator_start("b1");
    while(bl_iterator_next("b1")) {
        if($blitval(b1)=~"^a=info:xyz") {
            bl_iterator_append("b1", "a=info:abc\r\n");
            break;
        }
    }
    bl_iterator_end("b1");
...

2.29.  bl_iterator_insert(iname, text)

Add text before the line at the current iterator possition.

The parameters can be dynamic strings with variables.

This function can be used from ANY_ROUTE.

Example 1.29. bl_iterator_insert usage

...
    bl_iterator_start("b1");
    while(bl_iterator_next("b1")) {
        if($blitval(b1)=~"^a=info:xyz") {
            bl_iterator_insert("b1", "a=info:abc\r\n");
            break;
        }
    }
    bl_iterator_end("b1");
...

3. Selects

3.1. @hf_value

Get value of required header-value or param. Note that functions called 'value2' works with Authorization-like headers where comma is not treated as value delimiter. Formats: @hf_value.HFNAME[IDX] # idx value, negative value counts from bottom @hf_value.HFNAME.PARAM_NAME @hf_value.HFNAME[IDX].PARAM_NAME @hf_value.HFNAME.p.PARAM_NAME # or .param., useful if required called "uri", "p", "param" @hf_value.HFNAME[IDX].p.PARAM_NAME # dtto @hf_value.HFNAME[IDX].uri # (< & > excluded) @hf_value.HFNAME[*] # return comma delimited list of all values (combines headers) @hf_value.HFNAME # the same as above [*] but may be parsed by cfg.y @hf_value.HFNAME[*].uri # return comma delimited list of uris (< & > excluded) @hf_value.HFNAME.uri # the same as above [*] but may be parsed by cfg.y @hf_value.HFNAME[IDX].name # returns name part, quotes excluded @hf_value.HFNAME.name # returns name part of the first value @hf_value2.HFNAME # returns value of first header @hf_value2.HFNAME[IDX] # returns value of idx's header @hf_value2.HFNAME.PARAM_NAME @hf_value2.HFNAME[IDX].PARAM_NAME @hf_value.HFNAME[IDX].uri # return URI, quotes excluded @hf_value.HFNAME.p.uri # returns param named uri, not URI itself @hf_value.HFNAME.p.name # returns param named name, not name itself @hf_value.HFNAME[IDX].uri.name # any sel_any_uri nested features may be used @hf_value.HFNAME[IDX].nameaddr.name # select_any_nameaddr

Meaning of the parameters is as follows:

  • HFNAME - Header field name. Underscores are treated as dashes.

  • IDX - Value index, negative value counts from bottom

  • PARAM_NAME - name of parameter

Example 1.30. @hf_value select usage

...
$a = @hf_value.my_header[1].my_param;
xplog("L_ERR", "$sel(@hf_value.via[-1]), $sel(@hf_value.from.tag)\n");
$b = @hf_value.p_associated_uri;

xplog("L_ERR", "Route uris: '$sel(@hf_value.route[*].uri)'\n");
$rr = @hf_value.route.uri;

$prt = @hf_value2.authorization.integrity_protected;
...

3.2. @hf_value2

TBA.

3.3. @hf_value_exists

TBA.