Benchmark Module

Bastian Friedrich

Collax GmbH

Daniel-Constantin Mierla

Edited by

Bastian Friedrich


Table of Contents

1. Admin Guide
1. Overview
2. Dependencies
2.1. Kamailio Modules
2.2. External Libraries or Applications
3. Parameters
3.1. enable (int)
3.2. granularity (int)
3.3. loglevel (int)
3.4. register (str)
4. Functions
4.1. bm_start_timer(name)
4.2. bm_log_timer(name)
5. Exported Variables
5.1. $BM_time_diff
6. RPC Commands
6.1. benchmark.enable_global
6.2. benchmark.enable_timer
6.3. benchmark.granularity
6.4. benchmark.loglevel
7. Example of usage
2. Developer Guide
1. Available Functions
1.1. bm_register(name, mode, id)
1.2. bm_start(id)
1.3. bm_log(id)
2. Benchmark API Example

List of Examples

1.1. Set enable parameter
1.2. Set granularity parameter
1.3. Set loglevel parameter
1.4. Set register parameter
1.5. bm_start_timer usage
1.6. bm_log_timer usage
1.7. Enabling a timer
1.8. benchmark usage
2.1. Using the benchmark module's API from another module

Chapter 1. Admin Guide

1. Overview

This module helps developers to benchmark their module functions. By adding this module's functions via the configuration file or through its API, Kamailio can log profiling information for every function.

The duration between calls to start_timer and log_timer is stored and logged via Kamailio's logging facility. Please note that all durations are given as microseconds (don't confuse with milliseconds!).

2. Dependencies

2.1. Kamailio Modules

The following modules must be loaded before this module:

  • No dependencies on other Kamailio modules.

2.2. External Libraries or Applications

The following libraries or applications must be installed before running Kamailio with this module loaded:

  • None.

3. Parameters

3.1. enable (int)

Even when the module is loaded, benchmarking is not enabled per default. This variable may have three different values:

  • -1 - Globally disable benchmarking

  • 0 - Enable per-timer enabling. Single timers are inactive by default and can be activated through the RPC interface as soon as that feature is implemented.

  • 1 - Globally enable benchmarking

Default value is 0.

Example 1.1. Set enable parameter

...
modparam("benchmark", "enable", 1)
...

3.2. granularity (int)

Logging normally is not done for every reference to the log_timer() function, but only every n'th call. n is defined through this variable. A sensible granularity seems to be 100.

Default value is 1.

Example 1.2. Set granularity parameter

...
modparam("benchmark", "granularity", 500)
...

3.3. loglevel (int)

Set the log level for the benchmark logs. These levels should be used:

  • -5 - L_ALERT

  • -4 - L_BUG

  • -3 - L_CRIT

  • -2 - L_CRIT (no prefix)

  • -1 - L_ERR

  • 0 - L_WARN

  • 1 - L_NOTICE

  • 2 - L_INFO

  • 3 - L_DBG

Default value is 3 (L_INFO).

Example 1.3. Set loglevel parameter

...
modparam("benchmark", "loglevel", 4)
...

This will set the logging level to L_DBG.

3.4. register (str)

Register a timer id at startup. Required when using the start/log functions via Kemi framework. This parameter can be set many times to register several timer ids.

Default value is NONE.

Example 1.4. Set register parameter

...
modparam("benchmark", "register", "test")
modparam("benchmark", "register", "auth")
...

4. Functions

4.1.  bm_start_timer(name)

Start timer name. A later call to bm_log_timer() logs this timer..

Example 1.5. bm_start_timer usage

...
bm_start_timer("test");
...

4.2.  bm_log_timer(name)

This function logs the timer with the given ID. The following data are logged:

  • Last msgs is the number of calls in the last logging interval. This equals the granularity variable.

  • Last sum is the accumulated duration in the current logging interval (i.e. for the last granularity calls).

  • Last min is the minimum duration between start/log_timer calls during the last interval.

  • Last max - maximum duration.

  • Last average is the average duration between bm_start_timer() and bm_log_timer() since the last logging.

  • Global msgs number of calls to log_timer.

  • Global sum total duration in microseconds.

  • Global min... You get the point. :)

  • Global max also obvious.

  • Global avg possibly the most interesting value.

Example 1.6. bm_log_timer usage

...
bm_log_timer("test");
...

5. Exported Variables

Exported pseudo-variables are listed in the next sections.

5.1. $BM_time_diff

$BM_time_diff - the time difference elapsed between calls of bm_start_timer(name) and bm_log_timer(name). The value is 0 if no bm_log_timer() was called.

6. RPC Commands

6.1. benchmark.enable_global

Enables/disables the module. Parameter may be -1, 0 or 1. See description of "enable" parameter.

6.2. benchmark.enable_timer

Enable or disable a single timer. The following example enables timer "test" (the second parameter must be 0 to disable):

Example 1.7. Enabling a timer

...
kamcmd benchmark.enable_timer test 1
...

6.3. benchmark.granularity

Modifies the benchmarking granularity. See "granularity" variable.

6.4. benchmark.loglevel

Modifies the module log level. See "loglevel" variable.

7. Example of usage

Measure the duration of user location lookup.

Example 1.8. benchmark usage

...
bm_start_timer("usrloc-lookup");
lookup("location");
bm_log_timer("usrloc-lookup");
...

Chapter 2. Developer Guide

The benchmark module provides an internal API to be used by other Kamailio modules. The available functions are identical to the user exported functions.

Please note that this module is intended mainly for developers. It should be used with caution in production environments.

1. Available Functions

1.1.  bm_register(name, mode, id)

This function register a new timer and/or returns the internal ID associated with the timer. mode controls the creation of new timer if not found. id is to be used by start and log timer functions.

1.2.  bm_start(id)

This function equals the user-exported function bm_start_timer. The id is passed as an integer, though.

1.3.  bm_log(id)

This function equals the user-exported function bm_log_timer. The id is passed as an integer, though.

2. Benchmark API Example

Example 2.1. Using the benchmark module's API from another module

...
#include "../benchmark/benchmark.h"
...
struct bm_binds bmb;
...
...
/* load the benchmarking API */
if (load_bm_api( &bmb )!=0) {
    LM_ERR("can't load benchmark API\n");
    goto error;
}
...
...
/* Start/log timers during a (usually user-exported) module function */
bmp.bm_register("test", 1, &id)
bmb.bm_start(id);
do_something();
bmb.bm_log(id);
...