topoh Module

Daniel-Constantin Mierla

Edited by

Daniel-Constantin Mierla

Table of Contents

1. Admin Guide
1. Overview
2. Dependencies
2.1. Kamailio Modules
2.2. External Libraries or Applications
3. Parameters
3.1. mask_key (str)
3.2. mask_ip (str)
3.3. mask_callid (integer)
3.4. uparam_name (str)
3.5. uparam_prefix (str)
3.6. vparam_name (str)
3.7. vparam_prefix (str)
3.8. callid_prefix (str)
3.9. sanity_checks (integer)
3.10. uri_prefix_checks (integer)
3.11. event_callback (str)
4. Event Routes
4.1. event_route[topoh:msg-outgoing]

List of Examples

1.1. Set mask_key parameter
1.2. Set mask_ip parameter
1.3. Set mask_callid parameter
1.4. Set uparam_name parameter
1.5. Set uparam_prefix parameter
1.6. Set vparam_name parameter
1.7. Set vparam_prefix parameter
1.8. Set callid_prefix parameter
1.9. Set sanity_checks parameter
1.10. Set uri_prefix_checks parameter
1.11. Set event_callback parameter
1.12. Usage of event_route[topoh:msg-outgoing]

Chapter 1. Admin Guide

1. Overview

This module hides the SIP routing headers that show topology details. It is not affected by the server being transaction stateless or stateful. The script interpreter gets the SIP messages decoded, so all existing functionality is preserved.

The module is transparent for the configuration writer. It only needs to be loaded (tune the parameters if needed). The SIP server can be restarted without affecting ongoing calls - once it is up, can encode/decode topology details, thus no call will be lost.

By using same mask_key, many SIP servers can decode the message, for example, applicable for servers behind load balancers.

2. Dependencies

2.1. Kamailio Modules

The following modules must be loaded before this module:

  • rr module - server must perform record routing to ensure in-dialog requests are encoded/decoded.

2.2. External Libraries or Applications

The following libraries or applications must be installed before running Kamailio with this module loaded:

  • None. In the future the module can be enhanced to use a stronger encryption algorithm.

3. Parameters

3.1. mask_key (str)

Keyword to mask the headers.

Default value is "_static_value_".

Example 1.1. Set mask_key parameter

modparam("topoh", "mask_key", "some secret here")

3.2. mask_ip (str)

IP address to be used in masked headers to build valid SIP URIs. Can be any IP address, even a private-space or non-existing IP address (e.g.,,, including the SIP server address, but must not be an address potentially used by clients. It is not used at all for SIP routing.

Default value is "".

Example 1.2. Set mask_ip parameter

modparam("topoh", "mask_ip", "")

3.3. mask_callid (integer)

Whether to encode the Call-id: header. Some SIP extensions include the Call-id in the SIP message payload or header, so it is safe to not encode Call-id in such cases. Well-known extensions such as call transfer or conference join will be added to work with encoded Call-id.

NOTE: if you are using dialog module to terminate calls and this parameter is enabled, you must set the dialog module parameter 'lreq_callee_headers' to include the header: 'TH: dlh\r\n'.

Default value is 0 (do not mask).

Example 1.3. Set mask_callid parameter

modparam("topoh", "mask_callid", 1)

3.4. uparam_name (str)

Name of URI parameter where to store encoded value.

Default value is "line".

Example 1.4. Set uparam_name parameter

modparam("topoh", "uparam_name", "myparam")

3.5. uparam_prefix (str)

Prefix to be added in encoded URI parameters.

Default value is "sr-".

Example 1.5. Set uparam_prefix parameter

modparam("topoh", "uparam_prefix", "xyz")

3.6. vparam_name (str)

Name of Via: parameter used to store encoded value.

Default value is "branch".

Example 1.6. Set vparam_name parameter

modparam("topoh", "vparam_name", "myv")

3.7. vparam_prefix (str)

Prefix to be added in encoded Via: parameters.

Default value is "z9hG4bKsr-".

Example 1.7. Set vparam_prefix parameter

modparam("topoh", "vparam_prefix", "xyz")

3.8. callid_prefix (str)

Prefix to be added in encoded Call-ID: headers.

Default value is "!!:".

Example 1.8. Set callid_prefix parameter

modparam("topoh", "callid_prefix", "***")

3.9. sanity_checks (integer)

If set to 1, topoh module will bind to sanity module in order to perform sanity checks over received SIP request. Default sanity checks are done. It is useful to check if received request is well formatted before proceeding to encoding/decoding.

Default value is 0 (do not bind to sanity module).

Example 1.9. Set sanity_checks parameter

modparam("topoh", "sanity_checks", 1)

3.10. uri_prefix_checks (integer)

If set to 1, topoh module will check if URIs to be decoded match the expected prefix composed from mask IP and parameter name prefix. It can make the topoh processing safer by avoiding to try decoding URIs which were not encoded previously by topoh.

Note: do not enable this option if you have SIP devices that can alter the URI values it takes from Contact or Record-Route headers (like adding port 5060 when no port is in received URIs, or that introduces new parameters at an unknown position).

Default value is 0.

Example 1.10. Set uri_prefix_checks parameter

modparam("topoh", "uri_prefix_checks", 1)

3.11. event_callback (str)

The name of the function in the KEMI configuration file (embedded scripting language such as Lua, Python, ...) to be executed instead of event_route[...] blocks.

The function receives a string parameter with the name of the event.

Default value is 'empty' (no function is executed for events).

Example 1.11. Set event_callback parameter

modparam("topoh", "event_callback", "ksr_topoh_event")
-- event callback function implemented in Lua
function ksr_topoh_event(evname)"===== topoh module triggered event: " .. evname .. "\n");
	return 1;

4. Event Routes

4.1. event_route[topoh:msg-outgoing]

It is executed before doing topology hiding processing for an outgoing SIP message. If 'drop' is executed inside the event route, then the module skips doing the topology hiding.

Inside the event route the variables $sndto(ip), $sndto(port) and $sndto(proto) point to the destination. The SIP message is not the one to be sent out, but an internally generated one at startup, to avoid reparsing the outgoing SIP message for the cases when topology hiding is not wanted.

Example 1.12. Usage of event_route[topoh:msg-outgoing]

event_route[topoh:msg-outgoing] {
  if($sndto(ip)=="") {