Differences

This shows you the differences between two versions of the page.

--- cookbooks:5.1.x:core [2018/11/28 15:29] – [Arithmetic Operations] prevent wiki formatting mslehto
+++ cookbooks:5.1.x:core [2020/04/03 07:29] (current) – [sip_warning (noisy feedback)] henningw
@@ Line 47: / Line 47: @@
 </code>
+Usually setting a parameter is ended by end of line, but it can be also ended with **;** (semicolon). This should be used when the grammar of a parameter allows values on multiple lines (like **listen** or **alias**) and the next line creates a conflict by being swallowed as part of value for previous parameter.
+<code c>
+alias="sip.mydomain.com";
+</code>
+If you want to use a reserved config keyword as part of a parameter, you need to enclose it in quotes. See the example below for the keyword "dns".
+<code c>
+listen=tcp:127.0.0.1:5060 advertise "sip.dns.example.com":5060
+</code>
 ==== Modules Settings Section ====
@@ Line 725: / Line 736: @@
 ==== auto_bind_ipv6 ====
-When turned on, Kamailio will automatically bind to all IPv6 addresses (much like the default behaviour for IPv4).
+When turned on, Kamailio will automatically bind to all IPv6 addresses (much like the default behaviour for IPv4). Default value is off.
 Example:
@@ Line 943: / Line 954: @@
 ==== latency_limit_db ====
-Limit of latency in ms for db operations. If a db operation executed via DB API v1 takes longer that its value, a message is printed in the logs, showing the first 50 characters of the db query.
+Limit of latency in us (micro-seconds) for db operations. If a db operation executed via DB API v1 takes longer that its value, a message is printed in the logs, showing the first 50 characters of the db query.
@@ Line 1343: / Line 1354: @@
 ==== pv_buffer_size ====
-The size in bytes of internal buffer to print dynamic strings with pseudo-variables inside. The default value is 8192 (8kB).
+The size in bytes of internal buffer to print dynamic strings with pseudo-variables inside. The default value is 8192 (8kB). Please keep in mind that for xlog messages, there is a dedicated module parameter to set the internal buffer size.
 Example of usage:
@@ Line 1425: / Line 1436: @@
 ==== sip_warning (noisy feedback) ====
-Can be 0 or 1. If set to 1 (default value) a 'Warning' header is added to each reply generated by Kamailio.
+Can be 0 or 1. If set to 1 (default value is 0) a 'Warning' header is added to each reply generated by Kamailio.
 The header contains several details that help troubleshooting using the network traffic dumps, but might reveal details of your network infrastructure and internal SIP routing.